Our Capabilities Built to Perform. Proven to Deliver.
30 years of RF & microwave engineering excellence, backed by world-class lab infrastructure, full-chain production lines, and 100% product testing. Every component that leaves our facility meets the most demanding aerospace, defense, and telecom standards.
30+
Years Engineering
Experience
100%
Full Inspection
Rate
110GHz
Max Frequency
Coverage
3000W
Peak Output Power
Capability
Inside Our Production Facility
A full walkthrough of our assembly lines, RF anechoic chambers, and precision testing infrastructure -- engineered for zero-defect output.
Watch Factory Tour
Replace this placeholder with your actual video embed or file
Key Equipment Gallery
8 critical facility and equipment photos -- replace placeholders with your actual equipment imagery.
RF Anechoic Chamber
Full-absorber shielded room · EMC & antenna testing
VNA Test Station
S-parameter · up to 110GHz
High-Power Test Bench
3000W load · PA validation
SMT Assembly Line
PCB · precision placement
ESS Thermal Chamber
−55°C to +125°C · burn-in
Noise Figure System
LNA NF · mmWave calibration
Precision Tuning Station
Manual trim · alignment
QC & Packaging
Final inspection · outbound
R&D Lab Equipment
Industry-grade instruments covering DC to 110GHz, enabling full-spectrum characterization, validation, and reliability screening of every component we produce.
RF Anechoic Chamber
Shielded · Absorber-lined
Vector Network Analyzer
S-Parameter · mmWave
High-Power Test Bench
PA Validation · Load Testing
Noise Figure Analyzer
LNA · Low-NF Validation
Signal / Spectrum Analyzer
Spurious · Harmonic · Phase Noise
Thermal / ESS Chamber
Burn-in · Thermal Cycling
Production Capacity Overview
Scalable output across all product lines, with flexible MOQ and rapid-delivery options to meet global procurement timelines.
Monthly Output Capacity
Units per month · standard production run
* Capacity scalable on request. Rush orders available. Contact sales for lead times.
QC Pass Rate
100% full inspection on every unit
On-Time Delivery
Across all global shipments
4-6
Weeks
Standard Lead Time
Rush delivery available on request
Environmental & Reliability Testing
Every product undergoes a rigorous multi-stage reliability screening protocol. Our testing standards align with MIL-STD, IEC, and customer-specific requirements.
Thermal Testing
- Thermal cycling −55°C to +125°C (MIL-STD-810)
- High-temperature storage & operating life test
- Burn-in screening (ESS) under powered RF conditions
- Thermal shock test (rapid transition > 10°C/min)
Humidity & Corrosion
- Damp heat test 85°C / 85% RH (IEC 60068-2-78)
- Salt spray / salt fog corrosion test
- Condensation cycling test
- Sealing & hermeticity leak test
Mechanical Stress
- Vibration test per MIL-STD-810G Method 514
- Mechanical shock test (half-sine pulse)
- Connector torque & mating cycle endurance
- Altitude / low-pressure decompression test
RF Electrical Performance
- Full S-parameter characterization (VNA, 100%)
- Output power, gain, and PAE verification
- Noise figure measurement (LNA, 100% units)
- Spurious & harmonic emission analysis
Switching & Timing
- Switching speed validation ≤ 50ns (oscilloscope)
- Isolation & insertion loss per port (SP4T / SP8T)
- High-power handling test (up to 200W CW)
- Lifetime cycling endurance (> 10M switching cycles)
Amplitude & Phase Balance
- Amplitude imbalance < ±0.3 dB across all ports
- Phase imbalance < ±3° across full bandwidth
- Insertion loss uniformity across 128-way dividers
- Temperature-stability tracking over full op. range
Equipment Detail Specifications
Expand each panel to review full technical parameters for our core lab and production equipment.
RF Anechoic Chamber
Shielded test room · EMC / OTA / Antenna
RF Anechoic Chamber
Shielded test room · EMC / OTA / Antenna
Physical Specs
Performance
Applications: Antenna gain & pattern measurement, OTA testing, EMC pre-compliance screening, radiated emission & immunity testing for RF modules up to 40 GHz.
Vector Network Analyzer (VNA)
4-Port · 10 MHz - 110 GHz
Vector Network Analyzer (VNA)
4-Port · 10 MHz - 110 GHz
Core Parameters
Calibration
Applications: Full S-parameter measurement for all product lines. Used for 100% production testing of LNAs, power dividers, PIN switches, and custom mmWave modules up to 110 GHz.
High-Power Test System
3000W CW · PA & Switch Validation
High-Power Test System
3000W CW · PA & Switch Validation
Power Parameters
Load & Safety
Applications: Saturation power, PAE, and linearity testing for all PA product lines up to 3000W. Also used for high-power PIN switch insertion loss and isolation validation at 200W input.
Thermal / ESS Environmental Chamber
−55°C to +125°C · MIL-STD-810 · HALT
Thermal / ESS Environmental Chamber
−55°C to +125°C · MIL-STD-810 · HALT
Thermal Parameters
Humidity & Standards
Applications: ESS burn-in under powered RF conditions, thermal cycling for solder joint reliability, HALT/HASS screening, humidity exposure for hermetic seal validation, and long-term aging tests per customer specification.
Noise Figure Analyzer
0.01 dB resolution · LNA & Receiver characterization
Noise Figure Analyzer
0.01 dB resolution · LNA & Receiver characterization
Measurement Range
Accuracy
Applications: 100% production NF measurement for all LNA product lines (NF as low as 0.5 dB). Used in conjunction with VNA for complete small-signal characterization of receiver front-end modules.
SMT Assembly & Precision Tuning Line
Full production chain · PCB to finished module
SMT Assembly & Precision Tuning Line
Full production chain · PCB to finished module
Assembly
Tuning & Inspection
Applications: Full SMT production for RF PCB assemblies, manual precision tuning for high-frequency modules, AOI and X-ray inspection for solder quality assurance across all product lines.
From Design to Delivery
Our vertically integrated production pipeline ensures traceability, quality control, and on-time delivery at every stage.
Custom spec & simulation
High-frequency substrate
± 25μm precision placement
Manual & automated tuning
Full RF & ESS screening
Global delivery + tech support
Ready to Qualify Our Facility for Your Supply Chain?
Our engineers are ready to discuss your application requirements, provide test data, and support your qualification process. Low MOQ. Rapid delivery. Zero performance compromise.
sales@safarimw.com · Safari Microwave · RF & Microwave Components Manufacturer